Laidishine has been engaged in the field of refrigerated lighting for 13 years and has spent a lot of time on product design. In order to obtain better lighting effects, Laidishine uses the lens principle in its products, and through the lens, the turning angle of the light is more suitable for the refrigerator. Therefore, during the installation process, if the direction of the light is not installed correctly, the lighting effect presented is also unsatisfactory.
The installation positions of LED lights in refrigerators are nothing more than ceiling lights, shelf lights, and column lights. The first two are horizontally installed, and the last is vertically installed.
When installed horizontally, although the lighting principles of ceiling lights and shelf lights are different, they are similar in installation. In order to make the light reach a certain depth inside the shelf and take into account the downward lighting at the same time, when installed horizontally, first, clamp the brackets on the lamp tube. Take the magnet mounting bracket as an example. The side with the magnet is on the side without the lens, and it is buckled after fitting at a right angle; the transparent side of the lamp tube faces inward, and the position with the lens faces downward. After being sucked onto the shelf of the refrigerator, connect the power cords at both ends (one end), and install a lamp tube horizontally.
When installed vertically, there are three types of lights: left, middle, and right. The middle vertical lights consist of two LED tubes, so it is easy to distinguish. And the power cord of the vertical lamp tube is on the top of the refrigerator, so the outlet end of the vertical lamp tube is the upper end. Since the vertical light is installed at the edge of the refrigerator door frame, the vertical light on the left needs to shine to the right, and the vertical light on the right needs to shine to the left. Therefore, when installing, the bracket is still clamped, the outlet end faces up, and the lens surface is on the side closer to the door; that is, the lens of the left lamp faces right, and the lens of the right lamp faces left. After the bracket and the cabinet are assembled, connect the power cord, and the column lamp is installed.
Among the after-sales problems we received from customers, most of the problems occurred in installation. If the installation position is wrong, the lighting effect will be greatly reduced. Of course, after purchasing our products, Laidishine also provides customers with professional installation guidance.
