LED technology has established itself and LED lights have many advantages. But sometimes an annoying effect occurs: Light-emitting diodes radiate their light almost point-shaped. Infolge, many people perceive the light as much too bright. Depending on where they are used, some LED light sources are therefore perceived as disturbing and one feels dazzled. LEDs that are too bright occur primarily in these scenarios:
Bright luminaire with integrated LEDs
LED illuminant shines too bright
Annoying device LEDs
Depending on how the LEDs are used, there are different ways of darkening the lights. In the following sections you will find the steps to solve the most common cases of bright LEDs.
LED illuminants are usually used retrospectively as replacements for old halogen or incandescent lamps. Especially LED spots or very small pin-base lamps can be very bright depending on their power.
Replace illuminant
Replacing the bulbs that are too bright with a variant with the same lamp socket but less power will solve the problem permanently. If the luminaire contains several light bulbs, it is advisable to replace only one bulb first. This way you can check if the weaker variant really doesn’t dazzle before you order a complete set to replace all the LED bulbs.
Verwenden Sie einen Dimmer
Many light sources are only too bright in certain situations. To darken the lamp if necessary, the use of a dimmer is recommended. This way you can always adjust the brightness accordingly. LED dimmers are available for installation in place of the light switch and also as intermediate plugs.
Verwenden Sie eine Diffusorfolie
Außerdem, Es gibt sogenannte Diffusorfolien, die zu einer Streuung des Lichts führen. Abhängig von der Einbausituation, Eine solche Folie kann vor dem LED-Leuchtmittel angebracht werden. Aufgrund der breiteren Lichtverteilung, die Lichtquelle erscheint nicht mehr so
